Factory Price: ASTM/A53/A106/A333 DIN St37/St45/10#/20#/45#/Q235B Carbon Steel Pipe

Carbon steel pipe is a spiral seam steel pipe with a steel coiled plate as a raw material, which is often extruded and formed by welding with an automatic double-wire submerged arc welding process. The spiral steel pipe feeds the strip steel into the welded pipe unit, and after being rolled by multiple rollers, the strip steel is gradually rolled up to form a round tube blank with an open gap. 3mm, and make the two ends of the welding port flush.

Carbon Steel Pipe

We have a series of production processes, and the stock is abundant, and the seamless carbon steel pipe is widely used.
The steel pipe has a hollow section and is widely used as a pipeline for transporting fluids, such as pipelines for transporting oil, natural gas, gas, water and certain solid materials. Compared with solid steel such as round steel, steel pipe has the same bending and torsional strength, and is lighter in weight. It is an economical section steel and is widely used in the manufacture of structural parts and mechanical parts, such as oil drill pipes, automobile transmission shafts, Bicycle racks and steel scaffolding used in building construction, etc.

Product Parameters
 

Standard Carbon Steel Pipe Specifications & Grades

A/SA-106 

ASTM A106 seamless steel pipe (also known as ASME SA106 pipe) is commonly used in the construction of oil and gas refineries, power plants, petrochemical plants, boilers, and ships where the piping must transport fluids and gases that exhibit higher temperatures and pressure levels.
Scope

ASTM A106 Seamless Pressure Pipe (also known as ASME SA106 pipe) covers seamless carbon steel nominal wall pipe for high-temperature service. Suitable for bending, flanging and similar forming operations.

NPS 1-1/2″ and under may be either hot finished or cold drawn. NPS 2″ and larger shall be hot finished unless otherwise specified.

Process

Killed steel, with primary melting process being open-hearth, basic-oxygen, or electric-furnace, possibly combined with separate degassing or refining.

1/2" Nominal to 24"O.D. Seamless Pipe
Wall Thicknesses - Schedule 40 up to 4.000"

A/SA-53 Seamless steel pipe
ASTM A53 pipe (also referred to as ASME SA53 pipe) is intended for mechanical and pressure applications and is also acceptable for ordinary uses in steam, water, gas and air lines. It is suitable for welding and for forming operations involving coiling, bending, and flanging, subject to certain qualifications.

American Piping Products stocks a full range of A53 pipe (SA53 Pipe) in:
Grade B
NPS 1/8" to 26" diameter
Schedules 10 through 160, STD, XH and XXH
Scope
ASTM A53 pipe covers Seamless and Welded, Black and Hot-Dipped Galvanized nominal (average) wall pipe for coiling, bending, flanging and other special purposes and is suitable for welding. Continuous-Welded pipe is not intended for flanging. Purpose for which pipe is intended should be stated on order.
Materials and Manufacture
The steel for both seamless and welded pipe shall be made by one or more of the following processes: open-hearth, electric furnace, or basic-oxygen. The weld seam of electric-resistance welded pipe in Grade B shall be heat treated after welding.

 

Flanges & Fittings
Carbon Steel Butt Weld Fittings: A/SA-234 WPB * WPC
Carbon Steel Forged Fittings: A/SA-105
Carbon Steel Flanges: A/SA 105

High Yield Carbon Steel Pipe Specifications & Grades
API5L Seamless - Grades B (X42, X52, X60, X65 and above)
High Yield Carbon Steel Flanges & Fittings
High Yield Butt Weld Fittings: A- 860 or MSS SP75
WPHY42 (Y52, Y56, Y60, Y65)
High Yield Flanges: A-694 (F42, F52, F56, F60, F-65)

Seamless Steel Pipe Standard